Plans in this section are designed for standard 4-foot by 8-foot sheets of plywood. Simple table-top benchwork will work for all of the plans. Track plans have been designed using Atlas' Right Track Software freeware v5. Original .RAL files have been included for your convenience.
Parts list:
|
Plan 1 A simple oval with two siding tracks. |
|||
Parts list:
|
Plan 2 A figure-8 loop with very tight radius curves. Can only handle very short locomotives. |
|||
Parts list:
|
Plan 3 A loop within a loop with a cross over between them. Uses 22" curves on outer. Needs insulated joiners at cross over. |
|||
Parts list:
|
Plan 4 This layout features a basic yard. Broad curves and #6 turnouts allow for 6-axle diesels. |
|||
Parts list:
|
Plan 5 A simple oval and passing track. Also features a small yard. Needs some flex-track. |
|||
Parts list:
|
Plan 6 An oval and pair of branch sidings, with and elevated reversing loop in the center. Requires special wiring and flex-track. |
|||
Parts list:
|
Plan 7 A loop and inner passing siding. Features an Atlas turntable and flex-track. |
|||
Parts list:
|
Plan 8 Code 83 rails. Simple loop and sidings. |
|||
Parts list:
|
Plan 9 Code 83 rail. A loop and basic yard. |
|||
Parts list:
|
Plan 10 Code 83. Two loops and cross-over between them. Requires insulated railjoiners. |